Penis Enlargement Products and Forum

[Savannah]

I CAN'T PUT ON MY EXTENDER CAN SOME PLEASE SHOW ME HOW OR HELP ME? PLEASE I TRIED AND TRIED BUT IT WON'T STAY ON AND I DON'T KNOW WHAT TO DO. I AM GETTING FRUSTRATED.

[Dangler]

YouTube, do a search for "x4 penis extender", there is a whole page of results. Many of the results have references to other YouTube videos.

or here for starters:
http://www.youtube.com/watch?v=71AGWWHyjOg&feature=related

Some one make this a sticky thread. please.

[treetop]

Check my posts. I explain how I do it, and there are links to pictures also.
TT

[Dangler]

Forum poster "gronendael" makes an excellent diagram & write up concerning the fastening process & consequent adjusting for tension here:
http://penisenlargementproducts.org/forum/topic3176.html#p7810

I will paste it below, for convenience, for new users:

"Thanks. I had seen Treetop's schedule and so was planning on trying to go by that once I understood how the device works. I think one misunderstanding I had originally was how you used the tension lines. Please tell me if I understand them correctly now. Here is a "diagram" as to which tension line is which as I understand them currently. I understood what they were for, but now how they were used nor which line was which...i.e. was the "first" 600g tension line the top or the bottom one? Anyway, here's how I understand it now.

```__ Tip of Penis
``/`` \
|||||||| End of X4 Device with penis strapped in
||||||||
|``````| Tension bars
|``````|
|======| Tension Line 1 = 600g
|``````|
|======| Tension Line 2 = 1200g
|``````|
|======| Tension Line 3 = 1800g
[|]````[|] Screws
|||||||| Base of X4 Device
||||||||
Base of Penis
Body

The next part I didn't understand was how to use them. Originally, I thought I was supposed to compress the device down to Tension Line 1, insert the penis, and then release the compression and the device would put 600g of stress on the penis. This is the theory I was going with at first.

After a couple days of this, it was obvious I was not making the correct assumption. Then it dawned on me after looking at treetop's pics, even though I don't think he specifically explained it anywhere...yeah, sometimes I can be a little slow.

You compress the device completely and strap it...this simply makes it easier to get your penis strapped down. Then you release the compression and the device should be completely "open" or uncompressed. You should be able to see all 3 tension lines yet your penis is already stretched a bit. If it is not, then you need to add some of the lengthening tension bars.

Once you're strapped in, the device is totally uncompressed, and your penis is stretched a bit, you begin turning the screws to lengthen the device further. Your penis will reach its maximum stretchable limit as you are turning the screws. However, you continue to turn the screws. Since your penis is not stretching any further, the device will start to compress slowly as you lengthen it. As it compresses, it will move closer and closer to the tension lines. You keep unscrewing until the desired tension line lines up with the device. For beginners, this should either be tension line 1 or half way between lines 1 and 2 if you follow treetop's schedule. "

The entire thread is here:
http://penisenlargementproducts.org/forum/topic3176.html

Treetops schedule can be found here:
http://penisenlargementproducts.org/forum/topic2910.html#p6519

One part reads:"
Week Hrs Tension
2 2 900
3 3 1000
4 2 1000
5 3 1200
6 4 1200
7 4 1200
8+ 6 1200

As for tension, when not compressed the extender is at the first line, 600 grams if compressed. Second line about 1200 grams, and all the way to the third line 1800 grams. "

[Dangler]

This will come up again, so, credit to pfm this about length & rods used:

" User pfm wrote:
Height of extender fully extended with support piece, adjustment screws screwed "in".
Starts with just extender, followed by combinations of the extension rods.

extender = 3.75 inch
extender + .5 = 4.25 inch
extender + 1 = 4.75 inch
extender + 1 + .5 = 5.25 inch
extender + 2 = 5.75 inch
extender + 2 + .5 = 6.25 inch
extender + 3 = 6.75 inch
extender + 3 + .5 = 7.25 inch
extender + 3 + 1 = 7.75 inch
extender + 3 + 1 + .5 = 8.25 inch
extender + 3 + 2 = 8.75 inch
extender + 3 + 2 + .5 = 9.25 inch
extender + 3 + 2 + 1 = 9.75 inch
extender + 3 + 2 + 1 + .5 = 10.25 inch"

Adjustment screws can be turned to add almost an inch before coming unscrewed.

[J-man]

Put simply....Just watch the Cd.

[rocketman60]

If you're uncircumcised, we're starting a discussion specifically for guys who want to share tips for wearing the extender when you have foreskin: Uncircumcised discussion

[pfm]

I found this link, its an actual "real" demonstation.
http://video.google.com/videoplay?docid=1416789044957216543#docid=-4977876084090028141
I will say that this is not how I put on the extender, but this is close to most of the manufacturers recomendation. I prefer to put the extender on as TT described in his early post.
pfm

[sarracenia]

I just purchased my X4 earlier this week - it arrived in Australia in a very short time frame.

I have to say that the documentation - but physical and on the CD were inadequate. I had to fiddle around for a while to work it out even with these instructions.

I can't see why the manufacturer can't include the descriptive information outlined here. At very least provide URL to this site along with a "beginners" guide including all this type of information.

[gopher123]

Putting on the extender is hard at first. I myself had a terrible time trying to figure out how to put it on; however, with some practice and patience things do get better. You will find your own tension level and comfort strap. The key is to be patient and don't give up.

[treetop]

If you look earlier in this post, you will see links where you can see how to put it on.
All you have to do is go through people posts. You will learn a lot.
TT

[Dangler]

I wanted to get this link into a sticky, it's written by pudendum and is very insightful for newbies, or anyone looking for alternative ways to wear their extender.

http://penisenlargementproducts.org/forum/post5489.html?hilit=hours%20grams#p5489

[Dangler]

If you have a Yahoo ID, you can access user treetops documentation/pics here:

http://www.flickr.com/photos/treetopx4lpics/

One needs to be logged in, and accept the notice that the content is adult orientated.

I think that for all the work that this user did, that it can be very helpful to users.
The web content may not be there for ever.

[Andy_AK47]

Just go to http://www.x4labs.com/howto.php

This should answer all of your questions.

[rebelguy52]

http://www.youtube.com/watch?v=HY7vnl9aops

this is a good site