Penis Enlargement Products and Forum

[MikeZX]

Hey guys, I bought the deluxe set and extra 2100g tensions springs. Though I'm completely lost as to how to put this sucker on. Would appreciate any help, thanks.

[Andy_AK47]

Hey Mike,

Check out http://www.x4labs.com/howto.php

They have some videos that will show you how to put on the device. Good move on the 2100g tension springs. I would put them in at around week3 once you are used to the device. Replacing the springs is easy. I would recommend just disassembling the device and figuring it out on your own, that way you will get to know the inner workings.

Hope this helps and good luck!

[Dangler]

If you are headed toward maxing out to 2100g, I feel sorry for your dick. Happy turtling too.

[MikeZX]

Thanks for the replies, but I didn't actually mean putting the device itself on. I got that part. I meant swapping the standard springs with the 2100gs. Sorry about the confusion.

[MikeZX]

Just gonna put this up in case someone else wanted the same info I did.

I got a little more detail from customer support:

"Hello Sir,

You can remove the springs by unscrewing the top end of the pistons.

Start off by removing the white plastic support piece, simply pull gently on it until it slides off.
Unscrew the top end of the pistons by turning them counter clockwise. Simply add the support piece back on once the springs are changed.

Regards,
Customer Service"

Basically you tug out the tension bars and unscrew the back pieces to get to the spring. Might be a little slippery for fingers (which is why I thought I had to take something apart) so taking pliers and squeezing slightly lets you take them out effortlessly, swapping is a breeze after that.